How To Clean Mold in Air Conditioners in Brighton, CO

Table of Contents

mold in air conditioner

Mold is often called the silent killer because it can be dangerous for your health and hard to detect. Mold can form in your air conditioner due to high moisture levels, which can create a foul odor throughout your home. If you suspect you have a moldy air conditioner, you need to take steps to address it immediately. With that in mind, the team at Custom Heating, Plumbing & Air Conditioning Services is here to discuss strategies for cleaning mold in your air conditioner. 

Contact us today to schedule air conditioning service in Brighton, CO!

How Do I Know If I Have Mold in My Air Conditioner in Brighton, CO?

The single most obvious sign you have mold in your system is foul, musty odors coming from your AC vents. Many people describe the smell of mold as similar to smelly socks or a dirty gym locker room. If you have a window unit, the smell might only be localized to a single room. If you have mold in your central AC, it can spread through the entire house. 

Mold can also create fuzzy green and gray splotches on your walls. These splotches are most likely to form near your vent opening and inside of your ductwork. Mold can also start growing in your air filters if you go too long without changing them. 

You can visually inspect your system using a flashlight or opening the air handler to look at the AC filter. If you cannot identify visible mold growth but can still smell it, contact a professional to locate and fix the problem.  

Cleaning Methods for Getting Mold Out of Your Air Conditioner: Step-By-Step Guide

When cleaning mold out of your air conditioner, you will need the following tools and supplies:

  • Large bucket
  • Gloves
  • Face mask
  • Eye protection
  • Bleach
  • White vinegar
  • Scrub brush
  • Vacuum cleaner
  • Screwdriver

Eye and face protection is necessary as inhaling mold spores can be dangerous and cause medical complications. You should also open your windows and doors so you can vent any mold spores in the air. 

From there, you should do the following:

  1. First shut off the air conditioner’s electricity so it doesn’t suck up loose spores further into your ducts. 
  2. Create a gentle solution of bleach and vinegar in the bucket with water. The ratio should be one part solution to three parts water. 
  3. Open the AC using a screwdriver and identify the mold’s location. 
  4. Run the vacuum over the main mold spots to suck up any loose spores and get rid of the dust. 
  5. Next, dip the brush in your cleaning solution and gently scrub away the mold spots. If the mold is fairly new, you should be able to remove it without much difficulty. 
  6. After removing the mold, let the vinegar/bleach solution sit for 15 minutes before you remove it with warm water and a cloth. 
  7. Let the AC dry for at least two hours before putting it back together.

How To Prevent Mold Growing in Your Air Conditioner

The best way to deal with mold in your air conditioner is to prevent it from growing in the first place. Below are some extra tips to prevent mold growth in your AC:

  • If your air conditioner has a drain reservoir, make sure you empty it periodically. Moisture buildup can facilitate rapid mold growth. 
  • Replace your air filter at least once every six months. If you live in a humid location, you may want to change it every three months instead. 
  • Consider getting a dehumidifier to control moisture levels. You can buy a portable dehumidifier to target specific rooms, or you can buy and install a whole-home dehumidifier. 
  • Run your AC more frequently. Constant airflow disrupts mold spores so they cannot stick on the inside of your ducts and start propagating. You can also set the thermostat temperature higher so it runs more regularly. 

When To Call a Professional

You can probably clean mold out of a wall or window unit fairly easily, but cleaning a central AC unit will be much more difficult. If you have a central AC with mold in it, we highly recommend calling a professional as they can efficiently and correctly clean your system to get rid of every trace of mold. 

Your Trusted HVAC and Plumbing Provider in Brighton, CO

If you suspect you have mold in your air conditioner, contact Custom Heating, Plumbing & Air Conditioning Services online or call today at 303-341-1900 to schedule an appointment in one of our service areas!